Thursday, December 18, 2003

Rivit Rivit Rivit. The passenger foot box and floor aluminum has been rivitted in. I drilled and clecoed a couple new panels.

I looked at the fuel pump inlet fitting, and it looks like it's expecting a 3/8" fuel hose. The 5/16" hose I have just barely doesn't go on, and besides the line going from the outlet is 3/8" hose. So, I'm going to call Breeze and get the single 3/8" fuel pickup insert to replace the one I currently have, and then pick up an additional 6 ft section of 3/8" fuel hose. I'm going to coil some above the gas tank, so that it can be lowered and with the extra length in the fuel lines I should be able to remove the clamp (if I need to access it in the future). All in all this is going to cost about $120 to run the fuel lines. I'm also going to call AMP and see if they won't take the other pickup tank insert back.