I switched the rear wheels around as I put the wrong ones on the wrong sides on Tuesday. I moved the passenger side rear braided line towards the middle of the car about an inch to give better clearance with the wheel.

Updated Pre-Engine/Wheels list

• DONE! Brake light switch needs to be installed (on order from Napa, will pick it up on Monday)
• The gaps in the passenger and drivers side footboxes need to be sealed up with some silicone
• DONE ENOUGH FOR NOW, NEEDS FINAL TIGHTENING! The round steering shaft things (I don't know what they are called) need to be installed.
• NOT GONNA HAPPEN (YET), WILL NEVER GET IT OUT AGAIN! The upper steering shaft clips need to be installed
• DONE! Need an appropriate sized nut and bolt for the lower steering shaft to u-joint
• DONE! The battery ground cable needs to be fastened to the frame
• The positive battery cable needs to be fastened to the appropriate place on the drivers foot box (wherever that is)
• Clear coat the upper radiator hose extension
• Bead both radiator hose extensions
• Fill the Differential with gear oil and friction modifier
• DONE!Tighten up the IRS upper control arms
• ORDERED CORRECT CABLES TODAY! Emergency brake cable installation